Canon imagePROGRAF iPF6350 Basic Guide download pdf (Page 16)

Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide . If these

areas are dirty, we recommend cleaning them in advance. (→

, If Paper is Soiled)

•

If any paper has been advanced that will not be used, a message is shown requesting you to remove it.•

Press ▲ or ▼ to select Yes , and then press the OK button. Remove the paper and go to the next step.

Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not be advanced

correctly when you turn the printer on.

•

If it is difﬁ cult to load rolls from the front of the printer, load rolls from the back of the printer.•

Do not force the Roll Holder into the printer with the right and left ends reversed. This may damage the

printer and Roll Holder .

•

Do not release the ﬂ anges until the holder is loaded in the Roll Holder Slot .•

Be careful not to pinch your ﬁ ngers between the guide grooves (b) and the Roll Holder shaft (c) when

loading rolls.

•

Press the Load button.

Press ▲ or ▼ to select Roll Paper , and then press the

OK button.

Loading Rolls in the Printer

Load rolls in the printer as follows.

Open the Roll Feed Unit Cover .

Holding the Roll Holder ﬂ ange (a), load the Roll Holder

shaft into the guide grooves (b) on both sides of the Roll

Holder Slot . At this time, load the shaft so that the color

of the Roll Holder shaft (c) matches the color of the guide

groove.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

No comments

Canon imagePROGRAF iPF6350 Basic Guide Page 16