Canon imageCLASS MF216n Quick Start Guide download pdf (Page 11)

NOTE

• You cannot connect both the wired LAN and wireless

LAN at the same time. In addition, the machine is set to

the "Wired LAN" by default.

• When you connect to a network environment that is not

security protected, your personal information could be

disclosed to third parties. Please use caution.

• If you connect through a LAN in the o ce, contact your

network administrator.

Checking the Router

Select the connection method to the wireless LAN. Select from

the following two methods depending on the router (access

point) that you are using.

●

There is a button.

This machine supports WPS

(Wi-Fi Protected Setup). You

can easily setup if your router

(access point) has a button,

and if the mark is on the

router.

If you are not sure whether or not your router supports WPS,

please see the manual included in the product, or contact the

product manufacturer.

●

There is no button.

If there is no button on your

router (access point), you

may manually select SSID and

complete the settings. In this

case, you need to remember

SSID and network key of your

router (access point).

See “1 Check SSID or Network

Key for a Wireless LAN Router/Access Point.” (P.11) to learn

how to  nd out your SSID and network key.

To set up with WPS PIN code method, or setup manually:

e-Manual “Connecting to a Wireless LAN”

Setting Wireless LAN

(MF229dw/MF227dw Only)

Push Button Mode

Tap <Menu> in the Home Screen.

Tap <Network Settings>.

Tap <Wireless LAN Settings>.

Read the message that is displayed, and tap <OK>.

Tap <WPS Push Button Mode>.

Wireless LAN Settings

WPS Push Button Mode

WPS PIN Code Mode

SSID Settings

Power Save Mode

Wireless LAN Information

Tap <Yes>.

Press and hold* the button until the lamp lights or

blinks.

You should press the WPS button within 2 minutes after

you tap <Yes> in step 6.

* The time that you should hold the button may vary depending

on the router you are using.

Wait approximately 2 minutes after the connection.

IP address is set during this period of time.

When an error message appears:

Tap <OK> to close the screen, check whether or not the

network key is correct, and then retry the settings. If the

access point cannot be detected even after retrying,

see the following.

e-Manual “When an Error Message Appears”

When checking the network connection:

You can check if the machine is properly connected to the

network using a computer that connected to a network.

e-Manual “Viewing Network Settings”

To set IP address manually:

e-Manual “Connecting to a Wireless LAN”

Setting the Access Point Manually

Check SSID or Network Key for a Wireless LAN

Router/Access Point.

• Check the label on the Wireless LAN router.

• You can check the SSID or the network key using “Canon

MF / LBP Wireless Setup Assistant,” which is included in

the User Software and Manuals DVD-ROM supplied with

the machine.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Comments to this Manuals

No comments

Canon imageCLASS MF216n Quick Start Guide Page 11

Comments to this Manuals

Related products and manuals for Laser/LED printers Canon imageCLASS MF216n