Canon R-F10 Instruction Manual download pdf (Page 23)

Preparations  23

To remove the battery pack

1 Slide the battery compartment

cover away from the lens and

open it.

2 Press the battery release latch

and pull out the battery pack.

3 Close the cover and slide it

toward the lens until you hear a

click.

IMPORTANT

• Turn off the camcorder before connecting or disconnecting the com-

pact power adapter. After pressing to turn off the camcorder,

important data is updated in the memory. Be sure to wait until the green

ON/OFF (CHG) indicator goes out.

•The first time you use a battery pack, fully charge it and then use the

camcorder until the battery pack is completely exhausted.

• Do not connect to the camcorder’s DC IN terminal or to the compact

power adapter any electrical equipment that is not expressly recom-

mended for use with this camcorder.

• To prevent equipment breakdowns and excessive heating, do not con-

nect the supplied compact power adapter to voltage converters for

overseas travels or special power sources such as those on aircraft and

ships, DC-AC inverters, etc.

NOTES

• The battery pack will be charged only when the camcorder is off.

• We recommend charging the battery pack in temperatures between

10 °C and 30 °C (50 °F and 86 °F). Outside the temperature range of

0 °C to 40 °C (32 °F to 104 °F), charging will not start.

• If remaining battery time is an issue, you can power the camcorder

using the compact power adapter so the battery pack will not be con-

sumed.

• Charged battery packs continue to discharge naturally. Therefore,

charge them on the day of use, or the day before, to ensure a full

charge.

Battery release latch

POWER

COPY

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 183 184

No comments

Canon R-F10 Instruction Manual Page 23