Canon C7260 Owner's Manual download pdf (Page 46)

Turn ON the main power.

1. Open the main power switch cover.

2. Press the main power switch to the

“|” side.

3. Close the main power switch cover.

The main power indicator on the control panel lights when you turn ON the main power switch.

Various screens appear when system software is loading.

If you are using a login service, log in using the procedure for the login service you are using.

NOTE

• You can change the default display that appears after the machine is turned ON from [Default Screen

after Startup/Restoration] on the Settings/Registration screen. (See e-Manual > Settings/Registration.)

• If this machine is connected to a powered o Macintosh computer by USB cable, the computer may turn

on automatically when this machine does. In this case, disconnect the USB cable from the machine. You

may also be able to solve this problem by using a USB hub between the machine and the Macintosh.

• The response of the buttons and keys may not be optimal immediately after you turn ON the main

power of the machine.

• If you set [Quick Startup Settings for Main Power] to ‘On’ in [Preferences] (Settings/Registration), the tone

sounds when turning ON the main power of the machine. (Depending on the situations, the machine

does not startup quickly and the tone does not sound.)

• If the machine takes time to startup, see e-Manual > Settings/Registration.

• If you are using Department ID Management with the Copy Card Reader-F1, see e-Manual > Optional

Products (imageRUNNER ADVANCE C9280 PRO/C9270 PRO) or Optional Products (imageRUNNER

ADVANCE C7270/C7260).

• If you are using Department ID Management, see e-Manual > Basic Operations.

• If you are using SSO-H, see e-Manual > Basic Operations.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 75 76

No comments

Canon C7260 Owner's Manual Page 46