Canon imageCLASS D340 Specifications download pdf (Page 3)

Connecting the Power Cord

When the power cord is plugged into the machine and into the wall outlet, the machine is turned on.

There is no separate ON/OFF power switch. Once connected, the machine needs to warm up before

you can use it.The LCD displays PLEASE WAIT, then INSTALL CARTRIDGE.The LCD returns to the

standby display when you install the cartridge and load paper in the cassette or multi-purpose tray.

Loading Paper in the Cassette

1 Load the paper stack in the cassette.

• Insert the paper stack into the cassette

as far as it will go.

2 Slide the width guides and the length

guide to fit the size of the paper stack.

•Adjust the guides so that there is no space

between the guides and the paper.

NOTE

•Make sure the paper stack does not exceed the

width and length guides’ claws.

3 Set the multi-purpose tray on top of the

cassette.

NOTE

• Insert the power cord straight into the power cord

connector on the left side of the machine.

Do not insert it at an angle. Otherwise, the machine

may not be properly connected to the power source

and may not turn on. If this happens, disconnect the

power cord, and reconnect it correctly after a minute

or more.

•When disconnecting or connecting the power cord, be

sure to unplug or plug the power cord from the wall

outlet, not from the power cord connector on the

machine.

1 2 3 4 5 6 7 8

No comments

Canon imageCLASS D340 Specifications Page 3