Canon imageRUNNER LBP5970 User Manual download pdf (Page 62)

Step

Attach the cassette protective cover.

While pressing the levers of the cassette protective cover, insert the projections

into the slot on the rear side of the paper feeder.

IMPORTANT

Do not put your hand or any object on the cassette protective cover, nor

press it forcefully. This may result in damage to the cassette protective

cover.

Set the paper cassette in the printer unit and paper feeder.

Connect the interface cables except for the USB cable, and

connect the power cord.

Plug the power plug into the AC power outlet.

Connect the USB cable.

NOTE

After installing the paper feeder, you have to specify the settings for the

optional accessories in the [Device Settings] sheet in the printer driver. You

can obtain the status of the optional accessories automatically by clicking

[Get Device Status] in the [Device Settings] sheet.

If you cannot obtain the status of the optional accessories of the printer

automatically, select the installed optional accessories from [Paper Source

Options].

Installing RAM/ROM

Expansion RAM/ROM modules are to be installed on the main board at the

rear side of the printer. A Phillips screwdriver is required for installing a RAM/

ROM module. Have a screwdriver ready in advance that matches the size of

the screws. Observe the following guidelines when installing RAM or ROM.

CAUTION

• Be sure to turn the printer OFF, and then disconnect all the interface

cables and power cord from the printer before installing RAM/ROM. If

you attempt to install RAM/ROM when the printer is ON or any cable

is connected to the printer, this may result in an electrical shock.

• Be careful when handling a RAM/ROM module. Touching the edges

or a sharp portion of a RAM/ROM module may result in personal

injury.

IMPORTANT

• RAM/ROM modules contain components that are sensitive to static

electricity. Observe the following precautions when handling a RAM/ROM

module to prevent damage from static electricity.

-Touch a metal object to dissipate static electricity before handling a

RAM/ROM module.

-When handling a RAM/ROM module, do not touch anything that

generates static electricity such as the computer display.

-Do not touch the main board parts, printed wire, or connectors with your

hands.

-To prevent the RAM/ROM module from being affected by static

electricity, keep it in the protective bag until it is ready to be installed.

• Be sure not to touch the switches on the main board. If you change the

switches, the printer does not operate properly.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 72 73

Comments to this Manuals

No comments

Canon imageRUNNER LBP5970 User Manual Page 62

Comments to this Manuals

Related products and manuals for Multifunctionals Canon imageRUNNER LBP5970