Canon LASERBASE MF3110 User Manual Page 105

  • Download
  • Add to my manuals
  • Print
  • Page
    / 120
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 104
Print Quality Problems
9-15
Troubleshooting
9
Print Quality Problems
The print quality is not what you expect; print is not clear, has missing dots or white streaks.
Q Are the size, thickness and type of the paper you are using within the
specifications of the machine?
A Check that the paper you are using is supported by the specifications of the
machine. (See "Print Media Requirements," on p. 2-1.)
Q Is the cartridge installed correctly?
A Make sure the cartridge is installed correctly. (See the Set-Up Instructions.)
Q Is any toner left in the cartridge?
A See "When to Replace the Cartridge," on p. 8-3, and replace the cartridge if
necessary. (See "Replacing the Cartridge," on p. 8-13.)
Q Is the exposure adjusted correctly?
A Adjust the exposure correctly using [Exposure]. (See "Adjusting the Exposure
(Density)," on p. 5-6.)
Copies are dirty.
Q Is the platen glass or the platen glass cover clean?
A Clean the platen glass or the platen glass cover. (See "Cleaning the Scanning
Area," on p. 8-2.)
Q Is the cartridge free of damage?
A If there is a scratch on the cartridge, replace with a new one. (See "Replacing
the Cartridge," on p. 8-13.)
Q Is the machine adjusted to room temperature? If not, condensation might build
up inside the machine.
A Allow at least 2 hours for the machine to adjust to room temperature before
attempting to use it.
Q Is the machine installed in a stable location?
A Install the machine in a proper location. (See "Installation," on p. xiv.)
LD_Basic_US.book Page 15 Wednesday, June 30, 2004 2:02 PM
Page view 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 119 120

Comments to this Manuals

No comments