Canon PIXMA MP495 Service Manual download pdf (Page 6)

(6/15)

2. ADJUSTMENT / SETTINGS

2-1. Service Mode

< Service mode operation procedures >

Use the Service Tool on the connected computer.

1) Start the printer in the service mode.

i. With the machine power turned off, while pressing the Stop/Reset button, press and hold

the ON button. (DO NOT release the buttons).

ii. When the Power LED lights in green, while holding the ON button, release the Stop/Reset

button. (DO NOT release the ON button.)

iii. While holding the ON button, press the Stop/Reset button 5 times, and then release both

the ON and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm

and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm

LED.)

iv. When the Power LED lights in green, the machine is ready for the service mode operation

and "0" is displayed on the 7-segment LCD.

2) Start the Service Tool on the connected computer.

i. When a button is clicked in the Service Tool dialog box, that function is performed. During

operation of the selected function, all the Service Tool buttons are dimmed and inactive.

ii When the operation is completed, "A function was finished." is displayed, and another

function can be selected.

iii If a non-supported function is selected, "Error!" is displayed. Click OK in the error message

dialog box to exit the error.

< Service Tool functions >

(1) (2) (3) (4)

(5) (6) (7)

(8)

(9)

(10) (11) (12) (13) (14) (15)

(16)

(17)

(18)

(19)

(20)

(21)

(22)

(23)

(24)

1 2 3 4 5 6 7 8 9 10

No comments

Canon PIXMA MP495 Service Manual Page 6