Canon PIXMA MP210 Specifications download pdf (Page 46)

42 Routine Maintenance

2 Open the Paper Output Tray, then open the Output Tray Extension.

3 Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, and then

unfold the paper.

4 Load this and only this sheet of paper in the

Rear Tray with the open side to the front.

Set the Paper Thickness Lever to the left. For

details on the Paper Thickness Lever, refer to

“Inside” in “Main Components” of the User’s Guide

on-screen manual.

5 Perform bottom plate cleaning.

(1) Press the Maintenance button repeatedly until

J appears.

(2) Press the Black or Color button.

The paper cleans the inside of the machine as it feeds through the machine.

Check the folded part of the ejected paper. If it is smudged with ink, perform Bottom Plate

Cleaning again.

If the problem is not resolved after performing Bottom Plate Cleaning twice, the protrusions

inside the machine may be stained. Clean them according to instructions. See “Cleaning the

Protrusions Inside the Machine” on page 42.

 Cleaning the Protrusions Inside the Machine

If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton

swab or the like.

Note

When performing Bottom Plate Cleaning again, make sure to use a new piece of paper.

Caution

Be sure to turn off the power and disconnect the power cord before cleaning the machine.

(A)

(A) Load the paper after unfolding it.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 79 80

No comments

Canon PIXMA MP210 Specifications Page 46