Canon PIXMA MP210 Specifications download pdf (Page 50)

46 Troubleshooting

LED Cannot Be Seen At All

Cannot Install the MP Drivers

Error Code Cause Action

E, 2, x

E, 3, x

E, 4, x

An error requiring

servicing might have

occurred.

Make sure that the protective material is removed from the FINE Cartridge

Holder, then turn the machine off and unplug the power cord of the

machine from the power supply. After a while, plug the power cord of the

machine back in, and then turn on the machine. If the same error occurs,

contact your Canon service representative.

Cause Action

The machine is not powered on or the

LED is in the screen-saver mode.

z If the Power lamp is off

The machine is not powered on. Connect the power cord and press the ON/

OFF button. The machine will power on and the LED will light.

z If the Power lamp is lit

The LED may be in the screen-saver mode. On the Operation Panel, press a

button other than the ON/OFF button.

Cause Action

Unable to proceed beyond the Printer

Connection screen.

If you were unable to proceed beyond the Printer Connection screen, follow

the procedure below to reinstall the MP Drivers.

(1)Click Cancel on the Printer Connection screen.

(2)Click Start Over on the Installation Failure screen.

(3)Click Back on the screen that appears next.

(4)Click Exit on the PIXMA XXX screen (where “XXX” is your machine’s name),

then remove the CD-ROM.

(5)Turn the machine off.

(6)Restart your computer.

(7)Make sure you have no application software running, including anti-virus

software.

(8)Follow the procedure described in your setup sheet to reinstall the MP

Drivers.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

No comments

Canon PIXMA MP210 Specifications Page 50