Canon PIXMA MP450 User Manual download pdf (Page 66)

64 Chapter 7

Printing Photographs Directly From A Digital Camera

z About “Layout” and “Trimming”

For “Layout”, when the “Default setting” (selections based on the machine setting) is

selected, the machine operates based on the bordered/borderless setting specified in the

Memory card mode of the machine. Trimming is performed based on settings on the

PictBridge-compliant device.

z About “Image Optimize”

When “Default setting” (selections based on the machine setting) is selected, the machine

operates based on the settings in tab 2 of the Settings screen specified in Memory card

mode of the machine. (See page 29)

If you use a Canon PictBridge-compliant device, you can select “VIVID”, “NR”, “VIVID+NR”

or “FACE”.

(Note that these options cannot be selected on some models.)

z About “Date/File No. print”

By default, “Off” is selected for this machine.

If you select an image which has had the shooting date embedded in it using a camera with

the print mode, select “Off” for this function. If you select “Date”, “File No.”, or “Both”, the

date and/or file number will be printed over the embedded date.

Note

z When printing onto Photo Stickers (PS-101) (16-up), use the following

settings.

1. Load Photo Stickers (PS-101) in the Auto Sheet Feeder.

2. Select “10 x 15 cm / 4" x 6"” for the “Page size”, and “Photo” for the

“Media type”.

3. Select “N-up” for layout, then select “16”.

z Some PictBridge compliant devices display the Layout option; 2-up, 4-

up, 9-up, and 16-up. In this case always select “16-up”. If there are no

options on the PictBridge compliant device that correspond to 2-up, 4-

up, 9-up, or 16-up, printing on stickers is not possible.

z When you are using Photo Stickers (PS-101), do not set “Borderless

Printing” in “Layout” settings.

Note

z When “VIVID” is selected, the green and blue portions of photos are

printed more vividly.

z When “NR” (Noise Reduction) is selected, noise in blue portions, such

as the sky, and dark portions is removed.

z When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are

performed.

z When “FACE” is selected, a darkened face on the photo taken against

the light is brightened.

Note

z Never disconnect the USB cable during printing.

z When disconnecting the USB cable between the device and machine,

follow the instructions given in the instruction manual of the device.

z Controls of the device cannot be used for the following:

– Print quality setting

– Printer maintenance

z For the device operation method and troubleshooting, refer to your

digital device’s manual.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 141 142

Comments to this Manuals

No comments

Canon PIXMA MP450 User Manual Page 66

Comments to this Manuals

Related products and manuals for Photo printers Canon PIXMA MP450