Canon SELPHY ES20 User Manual download pdf (Page 56)

Printing from a Mobile Phone (Wireless Printing)

Infrared (IrDA) Wireless Printing (SELPHY ES2 only)

Print images transmitted from a mobile phone supporting infrared data communication (IrDA).

z The mobile phone must have the following features.

• Infrared data communication (infrared data communication port supporting IrDA)

• Built-in camera capable of recording and saving JPEG images.

1 Check that no memory cards are inserted in the printer, no

Bluetooth unit is attached, and the camera is not connected via

USB cable.

2 Press to turn the printer's power on until the power lamp lights

green.

3 Transmit an image from your mobile phone to the printer.

• Printing starts after data

transmission is completed.

• Printing is done according to the setting value specified in [Print Settings]. Setting of each item

must be done in advance (p. 46).

• During transmission, the power lamp blinks green. If transmission is interrupted, the power

lamp stops blinking and lights green. Check the message appearing on the mobile phone

display if an error occurs.

• Printing cannot be canceled by pressing during infrared printing.

• If the transfer is not working well, reposition the mobile phone closer and directly in front of the

infrared data receiver and reinitiate the transfer.

• Note that the distance over which infrared signals can be transmitted and received varies

according to the mobile phone model. For details on connection, refer to your mobile phone's

manual.

Within 20 cm (7.9 in.) (Do not

place objects within this

range.)

Effective range

Approx. 10 degrees (both top

or bottom and left or right)

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 102 103

No comments

Canon SELPHY ES20 User Manual Page 56