Canon iP1500 - PIXMA Color Inkjet Printer Service Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 21
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
( 10 / 21 )
6. TROUBLESHOOTING FLOWCHART
6-1. Printer Main Unit Troubleshooting Flowchart (how to confirm printer operation at refurbishment)
<Note for normal printer refurbishment>
At end of refurbishment, set the printer to the default shipment conditions (with the paper lifting plate
in the raised position, and the carriage locked in the home position), following the steps below.
1. Install the print head, and while pressing and holding the Power button, connect the AC plug.
After the LED lights in green, with the Power button still pressed, press the Resume/Cancel
button 2 times, and release both the Power and Resume/Cancel buttons. (Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting
with orange.)
2. Print the shipment inspection pattern, and reset the EEPROM, following the procedures in 4.
SERVICE MODE.
3. Press the Power button to turn off the printer. (The paper lifting plate is raised, and the
carriage moves to the print head replacement position.) Remove the print head. (DO NOT
print after this point.)
Open access cover,
and install print head
Power ON
Service Call
Error?
Connect to computer
Shipment inspection
pattern printing
Yes
No
Yes
No
No
S
ee 4. SERVICE MODE for
printing method.
< Shipment inspection pattern check items>
(See APPENDIX 1, SHIPMENT INSPECTION PATTERN 1.)
1. Non-ejection of ink: Yes NG
2. Top of form: Off the paper NG
3. Vertical lines: Not connected NG
4. Gray area: White lines / uneven density NG
Replace print head and print
shi
p
ment ins
p
ection
p
attern
Main waste ink counter
less than 7%?
Normal Defective
Yes
No
Yes
No
Yes
Service Call
Error?
Visually check the platen waste ink
absorber, and replace it if it is
soiled.
Correct?
Correct?
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Comments to this Manuals

No comments