Canon LBP-2260 Specifications download pdf (Page 5)

Turning the Power off

The procedure for turning the power off differs depending on whether or not a hard disk drive is

installed. If a hard disk drive is installed, always turn the power off by following the instructions

given for protecting the hard disk drive. (→ p. 5)

● If the printer is connected to a network, check that other computers are not

printing before you turn the power off.

● If you turn the power off when the ジョブ indicator is on, any printing data

remaining in the printer’s memory as well as printing data spooled on the

hard disk that is being processed (other than print data that has completed

storage processing) will be lost. Wait until the printing data that you need

has finished printing or go off-line, press the 排出 key to output the

printing data then turn the power off.

● Do not turn off the printer while printing.

● Do not turn off the printer during the self-diagnosis carried out immediately

after turning the power on.

● If a hard disk drive is installed, always check that the HDD indicator (green)

is not on. If the power is turned off while the HDD indicator (green) is on

(while the hard disk drive is being written into), this will damage the hard

disk drive and may render it inoperable.

● If a message appears on the display indicating that the NVRAM is initializing

or that the NVRAM is being written into, check that the message has

disappeared before you turn the power off.

● If a message appears on the display indicating the flash memory is being

written into or that the flash memory is being erased, check to make sure

the message has disappeared before you turn the power off.

■ If no hard disk drive is installed

Check that the ジョブ indicator is

off.

メッセージ/ HDD

1 2 3 4 5 6 7 8 9 10 ... 51 52

No comments

Canon LBP-2260 Specifications Page 5