Canon BJC 6000 - Color Inkjet Printer Technical Information download pdf (Page 45)

■ To avoid smudging caused by fingerprints, handle film by holding the edges

only.

■ To avoid fading, do not expose the printed film to prolonged sunlight.

■ Store unused papers and films flat. Do not remove papers from their

protective packaging until you are ready to use them.

■ Store unused film at temperatures between 59°F to 86°F (15°C to 30°C).The

relative humidity should be between 10% and 70%.

Printing and Uncurling Back Print Film

Be sure to print on the back (matte nonglossy) side of the film.Your data is

printed in mirror image so it can be viewed from the front or glossy side using a

back lighting device.

If Back Print Film becomes curled, follow these steps to uncurl it:

Cover the non-glossy side

of the film with a sheet of

plain paper.

Roll the film and paper

up in the direction opposite

the curl.

Do not roll the film too tight.

The film and paper rolled

together should be about one

inch (2.5 cm) in diameter.

Keep the film rolled up

for about five minutes.

You may want to fasten the roll

with a small piece of tape.

3-16 Paper Handling Chapter 3

PAPER

SUPPORT

PAPER THICKNESS

LEVER

PAPER OUTPUT TRAY

AND EXTENSION

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 115 116

No comments

Canon BJC 6000 - Color Inkjet Printer Technical Information Page 45