Canon BJC 6000 - Color Inkjet Printer Technical Information download pdf (Page 91)

Printout faint or colors are wrong

Print head nozzles in Print a Nozzle Check Pattern

one of the BJ cartridges Check the status of the print heads (see page 4-5).

are clogged or one of Clean the print heads (see page 4-7). Replace the

the inks has run out BJ tanks as necessary (see page 4-12).

Protective cap or tape Remove the protective cap and tape

have been reattached Install the BJ cartridge again (see page 4-16) and clean

to the BJ cartridge the print heads (see page 4-7).

Not printing on correct Reload the print media

side of the media Make sure that you load the media with the correct

print side up.

The last part of print job is not printing

Paper used for printing Specify the paper size you are using in the driver

differs from the paper Page Size setting

size specified in the If your software application allows you to specify the

software application paper size in the page setup, ensure that the Page Size

and printer driver settings in the software application and the printer

driver are the same.

Parallel cable not Check the parallel cable

connected correctly Make sure the parallel cable is securely fastened to the

computer and printer. See the Quick Start Guide for

details.

Printer cable fault Try to use another printer cable

Make sure you are using an IEEE 1284-compatible

parallel interface cable.

Switching device or Disconnect the switching device or external buffer

external buffer fault Print with the printer directly connected to the

computer. If you can then print normally, the fault

is probably in the switching device or external

buffer. Consult the switching device or external

buffer supplier.

Troubleshooting

Chapter 5 Troubleshooting 5-11

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 115 116

No comments

Canon BJC 6000 - Color Inkjet Printer Technical Information Page 91