2
2
12
12
Installation > Setting the Cassette
Installation > Setting the Cassette
Setting the Cassette
1) Hold the Side Guide Plate Lever and set the Side Guide Plate to
the specied size.
At this time, set the Side Guide Plate to the click position (the
position where you feel a click) by moving the Side Guide Plate
while using the size index (label) of the sheet size to be set as a
measure.
2) Hold the Trailing Edge Guide Plate Lever and set the Trailing
Edge Guide Plate to the specied size.
At this time, set the Trailing Edge Guide Plate to the click position
(the position where you feel a click) by moving the Trailing Edge
Guide Plate while using the size index (label) of the sheet size to
be set as a measure.
Side Guide Plate Lever
Side Guide Plate
Trail Edge Guide Plate
Trail Edge Guide Plate Lever
F-2-27F-2-27
3) Set papers.
4) Open the cover at the Size Plate insertion area.
F-2-28F-2-28
5) Cut the 2 places of the Size Plates with nippers.
F-2-29F-2-29
6) Insert the Size Plate in accordance with the paper size being set.
(Lump the Size Plates not in use together and store them at the
rear.)
F-2-30F-2-30
7) Close the cover at the Size Plate insertion area, and return
the cassette to the equipment.
MEMO:
The paper size setting is recognized automatically.
Comments to this Manuals