Canon Unit-AE1 Service Manual download pdf (Page 43)

5-3

Maintenance > Maintenance > Adjustment > Margin Adjustment

Pull out the cassette.

3) Check the 2 scale positions on the adjusting plates.

4) Loosen the 3 xing screws.

5) Move the adjusting plates back and forth by referring the scale checked in the step 2. As

moving the adjusting plate toward the rear by 1 scale, the left edge margin becomes 1mm

smaller.

MEMO:

When moving the scale, be sure that the amount of the value to be moved are the same

for the 2 points.

6) Tighten the xing screw.

7) Return the cassette to its original position.

MEMO:

When the cassette positions are uneven due to the mechanical adjustment, adjust them

by loosening the screw at left side.

8) Make copies using the Cassette 3 and 4, and check that the left edge margin is 2.5±1.5mm.

F-5-2F-5-2

F-5-3F-5-3

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49

No comments

Canon Unit-AE1 Service Manual Page 43