Canon imagePROGRAF iPF825 User Manual download pdf (Page 909)

100

101

Roll x is selected. (x is 1 (Upper) or 2 (Lower))

Cause Corrective Action

The indicated roll is specified for a print job sent from a

computer, but that roll is not loaded.

Load the indicated roll and try printing again.

To print on a sheet instead, hold down the Stop button for

more than a second to cancel printing, load a sheet, and then

print.

(See "Loading and Printing on Sheets.") →P.8

Roll x is empty. (x is 1 (Upper) or 2 (Lower))

"Lift the release lever and replace the roll."

Cause Corrective Action

The roll is empty. Follow these steps to replace the used roll with a new roll

of the same type and size.

1. Lift the Release Lever and remove the roll.

(See "Removing the Roll from the Printer.")

→P.644

(See "Removing the Roll Holder from Rolls.")

→P.649

2. Load the new roll.

(See "Attaching the Roll Holder to Rolls.") →P.629

(See "Loading Rolls in the Printer.") →P.634

3. If

no barcode was printed on the roll, specify the type

of paper.

(See "Selecting the Paper Type (Roll).")

→P.642

4. If

no barcode was printed on the roll, specify the paper

length.

(See "Specifying the Paper Length (Roll).")

→P.643

5. If "Not finished printing. Finish printing remaining

jobs?" is shown on the Display Screen, press the OK

button.

Printing will resume, starting from the page on which

the error occurred.

There is remaining roll paper, but because it could not be

advanced, it could not be detected.

Choose a higher level of Print Quality in the Advanced

Settings of the printer driver and try printing again.

(See "Giving Priority to Particular Graphic Elements

and Colors for Printing.") →P.56

Error Message

Messages regarding paper

iPF825 Roll x is selected. (x is 1 (Upper) or 2 (Lower))

893

1 2 ... 904 905 906 907 908 909 910 911 912 913 914 ... 955 956

Comments to this Manuals

No comments

Canon imagePROGRAF iPF825 User Manual Page 909

Comments to this Manuals

Related products and manuals for Printers Canon imagePROGRAF iPF825