Canon PIXMA iP100 User Manual download pdf (Page 13)

9Before Using the Printer

 Turning off the Printer

1 To turn off the printer, press the Power

button.

When the Power lamp stops flashing, the printer is

turned off.

This takes a few seconds or as long as around 30

seconds.

Note

Auto Power Off Feature

You can set the printer to turn off automatically.

Set this setting in the Maintenance sheet of the printer

driver in Windows

, and in the Canon IJ Printer

Utility on a Macintosh

. For setting details, refer to the

PC Printing Guide on-screen manual.

Important

When turning off the printer

Follow the procedure below to turn off the printer.

1. Confirm that the Power lamp on the printer

has gone out.

2. Unplug the power plug from the wall outlet.

When you press the Power button to turn off the

printer, the printer automatically puts a protective cap

on the Print Head to prevent the ink from drying. If you

remove the power plug before the Power lamp goes

out, this capping will not be done properly, causing the

Print Head to dry and clog.

If you stand the printer up or carry the printer

before the Power lamp goes out, this may cause

the ink to leak or the printer to break.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 91 92

No comments

Canon PIXMA iP100 User Manual Page 13