Canon LV-7292S User Manual download pdf (Page 37)



37



Select . The On-Screen Menu

disappears and  appears. Press the

OK button to expand the image size. Use the

Point ▲▼◄► buttons to pan the image. The

Panning function can work only when the image

is larger than the screen size. A projected image

can be also expanded by pressing the D.ZOOM

 or the OK button on the remote control unit.

To exit the Digital zoom +/– mode, press any

button except the D.ZOOM  buttons, OK and

Point buttons.



Select . The On-Screen Menu

disappears and  appears. Press the

OK button to compress image size.

The projected image can be also compressed by

pressing the D.ZOOM  or the OK button on the

remote control unit.



To return to the previous screen size, select a

screen size from the Screen Size Adjustment

Menu or select an input source from the Input

Source Selection Menu (see page 29) again,

or adjust the screen size with the D.ZOOM 

buttons.



• The minimum compression ratio is limited

depending on the input signal, when the Keystone

function is working or when the custom is selected

for the screen size.

• True and    are disabled and

cannot be displayed when 480i, 575i,  

,1035i or 1080i is selected in the PC System

Menu (p.30).

•  cannot be selected when True is

selected.

• The minimum compression ratio is limited at

Normal screen size.

LV -RC07





         







When this function is set to On, the picture will

be top/

bottom and left/right reversed. This function is

used to

project the image from a ceiling-mounted

projector.

Ceiling

When this function is set to On, the picture will

be left/right reversed. This function is used to

project the image from rear of the screen.

Rear

To reset the adjusted data, select Reset and

press the OK button. A confirmation box appears

and then select Yes. All adjustments will return

to their previous figures.

Reset



This function is used to adjust keystone

distortion of the projected image. Use the Point

▲▼ buttons to choose the item you want to

adjust.



Ceiling

Rear





To correct keystone distortion, press the OK

button.

Keystone appears on the screen. Use the

Point ▲▼ buttons to correct keystone

distortion (p.26).

To store or reset the keystone correction,

press the Point ► button.

 .............. Keep the keystone correction

even when the AC power cord

is plugged out or turning off

the projector.

Reset .............. Release the keystone

correction when the AC power

cord is plugged out or turning

off the projector.

Press the OK button.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 76 77

Comments to this Manuals

No comments