Canon Wireless File Transmitter WFT-E2 II A Instruction Manual download pdf (Page 31)

Setting Up the WFT-E1

Checking the Connection Status

If an error occurs, follow the procedure below to identify the error (p.52) and take suitable

steps to resolve the error. To resolve an error, you must be knowledgeable about the

wireless LAN, wired LAN, and FTP server.

Select [Image transfer (LAN) settings].

Select [Error description].

Select the error No. displayed on the

LCD panel.

a The respective error description will be

displayed.

Identifying an Error No. Displayed on the Display Panel

When switching from a wired LAN to a wireless LAN, be sure to keep the LAN cable connected.

If you switch to a wireless LAN while the cable is already disconnected, a connection with the

wireless LAN might not be established. If <E 81> (p.52) does not disappear, turn the

power switch off and on again.

¡ Use a category 5 or higher LAN cable.

¡ If you are connecting directly to a personal computer without any router or hub, use a cross

cable.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 57 58

No comments

Canon Wireless File Transmitter WFT-E2 II A Instruction Manual Page 31