Canon imageFORMULA DR-C125 Document Scanner User Manual download pdf (Page 49)

When [Check output after scanning] is set to [ON]

The Output Confirmation screen appears before the scanned images

are output.

Change the settings for the output method if necessary and then click

the output button. The name of the output button differs for each

selected output method.

Scanning with Start Button

By default, Scan First is pre-assigned to the Start button.

If you place the document and press the Start button,

CaptureOnTouch launches and scanning starts.

Hint

If a job is assigned to the Start button, the document is scanned and

the scanned images are output according to the settings of the job.

CaptureOnTouch ends automatically 5 seconds after the output

process finishes.

Scanner Settings

By default, CaptureOnTouch scans with scanning conditions that

match the document because scanning in full auto mode is enabled.

If you want to specify, for example, the scanning mode and document

size, you can configure the desired scanning conditions in the scanner

settings.

The scanner setting items are common to Scan First and Select Scan

Job.

When Scan First:

For Scan First, configure the scanner settings before you start

scanning.

Start button

0-00-DR-C125_RG_UK.book Page 49 Thursday, September 8, 2011 6:03 PM

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 67 68

No comments

Canon imageFORMULA DR-C125 Document Scanner User Manual Page 49