Canon IMAGEFORMULA DR-X10C User Manual

Please read this manual before using the scanner.After you finish reading this manual, keep it in a safe place for future reference.Reference Guide

21. Important Safety InstructionsTo ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below.Ins

31Before You Start Using the Scanner● Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and remove it from the

4 Some parts can only be cleaned when the power is turned ON. In these cases, be careful to avoid electric shock. Clean the scanner using a slightly

51Before You Start Using the Scanner Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it. This may result

62. FeaturesThe main features of the DR-X10C are described below. Refer to the User Manual for detailed information.Scanner Features● Fast Document Fe

71Before You Start Using the ScannerDetection Functions● Auto Image Type DetectionThe scanner automatically detects whether documents are in black and

8● Dropout and Color Enhancement FunctionsThe scanner is equipped with drop-out and enhancement functions that enable you to specify one color (red, b

91Before You Start Using the ScannerOther Functions● Rapid Recovery SystemWhen this function is activated and a sensor detects a misfeed due to a pape

103. Names and Functions of PartsThe names and functions of the DR-X10C parts are shown below.Front View, Feeder Inlet, and Eject Outleta Document Eje

111Before You Start Using the ScannerRear Viewa USB Connector (Type B)Connect the supplied USB cable here. b SCSI Connector (50-pin half-pitch D-sub r

iREAD CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGECANON SOFTWARE LICENSE AGREEMENTIMPORTANT-READ THIS AGREEMENT BEFORE OPENING THE SEALED DISK PAC

12

Chapter 2 Basic Operation1. Turning the Power ON and OFF... 14About the Power Switch ...14

141. Turning the Power ON and OFFUse the power switch to turn the DR-X10C scanner ON and OFF, or if you are using a USB connection, you can set the US

152Basic Operation2. DocumentsThe DR-X10C scanner can scan documents ranging in size from business cards and checks to 11" × 17"/A3 size. Th

16• To scan bound multi-page documents such as invoice booklets, place the bound edge against the feeder inlet and scan by manual feeding. • To use th

172Basic Operation3. Document Feed and Eject TraysBefore scanning, prepare the Document Feed and Eject Trays for the desired paper size.Preparing the

18 Document GuidesUnlock the document guides by gently pressing both sides of either guide (a), and sliding the document guides to match the width of

192Basic Operation2. Load your documents against the left feed guide.3. Lock the left document guide (a) by pulling out the lock lever, then slide the

203.Slide the right document guide all the way to the right.4. Unlock the left document guide.Preparing the Document Eject TrayThe Eject Tray includes

212Basic Operation Document Eject Tray ExtensionPull out the tray extension to match the length of your document. Eject Paper StoppersRaise the appr

iiNEITHER CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR NOR DEALER IS LIABLE FOR ANY LOSS OR DAMAGE INCLUDING CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE

224. Document Feeding MethodsTwo document feeding methods are available: Continuous Feeding, which feeds documents automatically from the document tra

232Basic OperationHint• The [Bypass Mode] key is linked to the [Manual Feeding] Feed Option setting of the ISIS/TWAIN driver.• When the [Bypass Mode]

245. ScanningScanning operations can be controlled by a scanning application program such as the CapturePerfect 3.0 software included with the scanner

252Basic OperationCapturePerfect 3.0CapturePerfect 3.0 is an ISIS-compatible application developed for Canon document scanners.CapturePerfect 3.0 incl

26Scan To PresentationThis mode is convenient when a compact scanner is used in an environment such as a conference hall, where it is connected to a l

272Basic Operation4. Set the [Default Page Size].IMPORTANTIf you select [Default] in the ISIS driver properties dialog box, that setting is applied he

2810.Place your document and click [Save] to start scanning.IMPORTANTYou must load your documents as described below, depending on the specified Feed

292Basic Operation6. Clearing a Paper Jam or Double Feed ErrorIf a paper jam or double feed occurs during scanning, a paper jam message appears on the

30IMPORTANTThe Rapid Recovery System setting in the ISIS/TWAIN driver causes the following process to occur after a paper jam. • When the Rapid Recove

312Basic Operation• When the Rapid Recovery System is enabled, scanning pauses when a double feed is detected, and the following error message is disp

iiiFCC REGULATIONS (For 120 V model)Document Scanner, Model M11063This device complies with Part 15 of the FCC Rules. Operation is subject to the foll

32

Chapter 3 Maintenance1. Regular Maintenance... 34Cleaning the Scanner...

341. Regular MaintenanceTo maintain scanning quality, routinely clean the scanner as described below.CAUTION• Do not use spray cleaners to clean the s

353MaintenanceCleaning the Glass and RollersIf scanned images contain spots or documents become dirty after scanning, the scanning glass or transport

36HintAn error message appears on the display panel if the upper unit is open (raised).Cleaning Rollers with a Cleaning SheetRollers in the transport

373Maintenance6. Insert the cleaning sheet adhesive-side up into the feed inlet.The cleaning sheet feeds through the scanner, and the Cleaning Mode ex

383.Wipe any dust off the scanning glass with a clean, dry cloth.4. Press the Stop key to turn off the lamp.5. Carefully lower the upper unit (a). Pre

393Maintenance3. Clean the black and white surfaces of the rollers by wiping horizontally with a moistened, wrung-out cloth.IMPORTANTWhen cleaning, be

403.Lift the pickup roller mounting lever, and remove the roller.4. Pull the feed roller lock lever down (a) and move it to the right (b) to unlock th

413Maintenance3. Push the feed roller lock lever up (a) and move it to the left (b) to lock the feed roller in place.4. Push the roller cover up until

ivEuropean Union (and EEA) only.This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Dire

423.Push the roller lock lever up (a) and move it to the left (b) to unlock the roller.4. Remove the retard roller.5. Use a moistened, well wrung-out

433Maintenance4. Replace the roller cover.5. Push the front of the roller cover in until it clicks into place.6. Carefully lower the upper unit (a). P

442. Replacing the Transport RollersAs the rollers start to wear out, feeding quality declines, and document feed errors, such as paper jams, become m

Chapter 4 Practical Examples1. Messages... 46Status Display ...

461. MessagesThere are two types of display panel messages: “status indicator messages” and “error messages” that appear when the scanner encounters a

474Practical ExamplesError MessagesWhen one of the following messages appears on the display panel, an error has occurred in the scanner. Follow the i

48 Skew DetectedError Code: J018Problem: A skewed document page contacted the wall of the transport path.Solution: Remove and reposition the document

494Practical Examples2. TroubleshootingThis section describes the problems that may occur during use of the scanner and how to solve them.Trouble Cate

50 The Scanner Is Not Recognized (Connecting via SCSI)If the scanner’s SCSI connection is not recognized, first confirm the following: ✔ Are the scan

514Practical ExamplesIf this does not solve the problem, consider the following possible causes:Cause Other applications are running in the background

vIntroductionThank you for purchasing the Canon imageFORMULA DR-X10C Document Scanner. Please read this and the following manuals thoroughly before us

52Problem Text or images from the back side of your document appear in the scanned image.Cause Brightness may be set too low.Solution Increase the Bri

Chapter 5 Appendix1. Specifications... 54Unit Specifications...

541. SpecificationsUnit SpecificationsTypeDesktop sheet-fed scannerScannable Document RequirementsWidth: 2" to 12.01" (50.8 mm to 305 mm)Len

555AppendixScanning Speed (LTR/A4 landscape)Black and White200 dpi Simplex 130 pages/min.Duplex 260 images/min.300 dpi Simplex 130 pages/min.Duplex 25

56ConsumablesRoller Replacement Kit (Product Code: 2418B001)Replacement kit for transport rollers (pick-up roller, feed rollers, and retard roller). (

575AppendixExternal Dimensions33.90" (861 mm)21.10" (536 mm)22.17" (563 mm)14.77" (375 mm)17.01" (432 mm)20.79" (528 mm)

582. IndexCCapturePerfect 3.0 ...25Cleaningfeed roller ...

CANON ELECTRONICS INC.1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPANCANON U.S.A. INC.ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A.CANO

viSymbols Used in This ManualThe following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions

viiTable of ContentsIntroduction ..... vManuals for the Scanner ...

Chapter 1 Before You Start Using the Scanner1. Important Safety Instructions ......... 2Installation Location .....