Canon FS20 Instruction Manual Page 60

  • Download
  • Add to my manuals
  • Print
  • Page
    / 123
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 59
60
Photos
Refer to this chapter for details on shooting photos – from capturing
and playing back photos to printing them.
Taking Photos
1 Set the camera mode dial to or
.
2 Turn on the camcorder.
/ / You can select
the memory to be used for recording
photos ( 32).
3 Press halfway.
Once the focus is automatically
adjusted, will turn green and
one or more AF frames will appear.
When you press on
the wireless controller, the photo is
recorded after the autofocus is
activated and locked.
4 Press fully.
The ACCESS indicator will flash as
the photo is being recorded.
IMPORTANT
Observe the following precautions while
the
ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the operating mode.
NOTES
If the subject is not suitable for autofocus,
turns yellow. Adjust the focus manually
( 51).
Selecting Photo Size and Quality
Photos are recorded as JPG files. As a
general rule, select a larger photo size
for higher quality. / /
Select the [LW 1152x648] size for
photos with an aspect ratio of 16:9.
Basic Recording
( 25)
PHOTO
PHOTO
PHOTO
COPY
Page view 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 122 123

Comments to this Manuals

No comments