Canon VK-16 User Manual download pdf (Page 77)

Configure Motion and Sensor Settings



Step 2: Enable recording and set an event priority

Tick Record on this sensor to

enable recording when a sensor is

triggered.

Select the event’s priority from a

drop-down list, from 1. Highest to

5. Lowest.



Step 3: Select a camera angle for the sensor

In the Camera Angle field, select a

Preset camera position from the

drop-down menu of available camera

angles. When the sensor is triggered,

the camera will be changed to this

position.

If you select Not Specified, the camera

will not be moved.

The camera angle can also be changed

by moving your mouse pointer in the

Preview area to display controls and

clicking to pan, tilt and zoom (t P. 56).

After the camera has been controlled,

the preset will be set to ‘Custom’.

You cannot modify the sensor name (identified as the ‘External

Device Input Name’ in the VB Camera Server configuration), which

is obtained from the Camera Server and therefore outside the

scope of VK-64 configuration.

Note

Click the Backlight drop-down menu and select ‘On’ to

compensate for camera views with strong backlighting*. The

setting will be used when the sensor is triggered. This is useful, for

example, if a camera angle would change from an indoor view to an

outdoor view when the sensor is triggered.

*If you are using a VB-C50i/VB-C50iR, VB-C50FSi and VB-C50Fi, the

backlight menu options are ‘High’, ‘Medium’, ‘Low’ and ‘Off’.

Tip

Configuring Recording Schedules

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 155 156

No comments

Canon VK-16 User Manual Page 77