Canon EOS 6D User Manual download pdf (Page 153)

153

Responding to Error Messages

In the case of [q], is EOS Remote running?

X Establish a connection using EOS Remote (p.37, 78).

In the case of [l], is the power of the printer on?

X Turn on the power of the printer.

Is EOS Utility running?

If a connection cannot be established even when EOS Utility is

running, restart EOS Utility and try again to establish the connection.

Are the camera and the access point set to use the same

encryption key for authentication?

X This error occurs if the encryption keys do not match when the

authentication method for encryption is set to [Open system].

The setting is case-sensitive, so check upper- and lower-case

characters. Make sure that the correct encryption key for

authentication is entered on the camera (p.69, 117).

Is the power of the target device and access point on?

X Turn on the power of the target device and access point and wait

for a while.

What to check on the camera

On the camera, IP address is set to [Auto assign]. Is this the

correct setting?

X If no DHCP server is used, configure settings after setting the IP

address to [Manual setting] on the camera (p.59, 64, 70, 109, 113,

118).

11: Connection target not found

12: Connection target not found

21: No address assigned by DHCP server

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 172 173

No comments

Canon EOS 6D User Manual Page 153