Canon EOS 700D User Manual download pdf (Page 127)

127

3 Noise Reduction SettingsN

You can reduce noise in long exposures.

Select [Long exp. noise

reduction].

Under the [z3] tab, select [Long

exp. noise reduction], then press

<0>.

Long Exposure Noise Reduction

About [Multi Shot Noise Reduction]

The following functions cannot be set: AEB, WB bracketing, [z3: Long

exp. noise reduction], 1+73/1. If any of these has already been

set, [Multi Shot Noise Reduction] cannot be set.

Flash shooting is not possible. The AF-assist beam will be emitted according to

the [

54: Custom Functions (C.Fn)

]’s [

4: AF-assist beam firing

] setting.

You cannot set [Multi Shot Noise Reduction] for bulb exposures.

If you turn off the power or change the shooting mode to a Basic Zone

mode, movie shooting, or bulb, the setting will change to [Standard].

If there is significant misalignment in the image due to camera shake, the

noise reduction effect may be minimal.

If you are handholding the camera, keep it steady to prevent camera

shake. Using a tripod is recommended.

If you shoot a moving subject, the subject’s movement may leave

afterimages or the surrounding area of the subject may become dark.

The image alignment may not function properly with repetitive patterns

(lattice, stripes, etc.) or flat, single-tone images.

Recording the image to the card will take longer than with normal

shooting. During the processing of the images, “BUSY” will be displayed

and you cannot take another picture until the processing is completed.

[z3: Dust Delete Data] cannot be set.

If [

Multi Shot Noise Reduction

]

is set, direct printing (p.280) is not

possible.

1 ... 126 127 128 ... 388

No comments

Canon EOS 700D User Manual Page 127