Canon EOS 760D User Manual download pdf (Page 125)

126

Four methods (metering modes) to measure the subject’s brightness

are provided. Normally, evaluative metering is recommended.

In Basic Zone modes, metering mode is set automatically.

Select [Metering mode].

 Under the [z2] tab, select [Metering

mode], then press <0>.

Set the metering mode.

 Select the desired metering mode,

then press <0>.

q Evaluative metering

General-purpose metering mode suited even

for backlit subjects. The camera sets the

exposure automatically to suit the scene.

w Partial metering

Effective where there are much brighter lights

around the subject due to backlight, etc. The gray

area in the left figure is where the brightness is

metered to obtain the standard exposure.

r Spot metering

Effective when metering a specific part of the subject

or scene. The gray area in the left figure is where the

brightness is metered to obtain the standard

exposure. This metering mode is for advanced users.

e Center-weighted average metering

The brightness is metered at the image center

and then averaged for the entire scene. This

metering mode is for advanced users.

q Changing the Metering ModeK

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 222 223

No comments

Canon EOS 760D User Manual Page 125