
93
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Adjusting the Flash Output
Still Images
Movies
Choose from the three ash levels in [ ][ ][ ] modes.
1
Set the ash mode to [Manual ash].
● Press the [ ] button and choose
[Flash Control] on the [ 5] tab. In
[Built-in ash settings], set [Flash Mode]
to [Manual ash] (=
35).
2
Congure the setting.
● Raise the ash, press the [ ] button and
immediately turn the [ ] dial to choose
the ash level, and then press the [ ]
button.
● Once the setting is complete, the ash
output level is displayed.
[
]: Minimum, [ ]: Medium,
[ ]: Maximum
● You can also set the ash level by accessing MENU (=
35)
and choosing [
5] tab > [Flash Control] > [Built-in ash settings]
> [
ash output].
● You can also access the [Flash Control] screen (=
35) as
follows.
- Press and hold the [
] button for at least one second.
- When the ash is up, press the [
] button and immediately
press the [
] button.
● You can also access the [Flash Control] screen (=
35) by
pressing the [
] button and touching [ ].
Shooting Long Exposures (Bulb)
With bulb exposures, shots are exposed for as long as you hold down the
shutter button.
1
Specify bulb exposure.
● Set the shutter speed to [BULB],
following steps 1 – 2 in “Specic Shutter
Speeds and Aperture Values ([M] Mode)”
(=
92).
2
Shoot.
● Shots are exposed for as long as you
hold the shutter button all the way down.
The elapsed exposure time is displayed
during exposure.
● Mount the camera on a tripod or take other measures to keep it
still and prevent camera shake. In this case, also disable image
stabilization (=
86).
● Images from bulb exposures may have more noise and look
grainy. Noise can be reduced by setting [Long exp. noise
reduction] to [AUTO] or [ON] (=
89).
● You can also use a Remote Controller (sold separately) for bulb
exposures (=
171).
● When [Touch Shutter] is set to [Enable], shooting is started by
touching the screen once and stopped by touching it again.
Be careful not to move the camera when touching the screen.
Comments to this Manuals