Canon EOS C500 User Manual download pdf (Page 110)

Special Recording Modes

110

Pre-recording Mode

When pre-recording mode is activated, the camera starts recording

continuously into a temporary memory of approximately 3 seconds so

when you press the START/STOP button, the clip will contain also

approximately 3 seconds of video and audio recorded before you pressed

the button.

1 Set the system priority to MXF (A 64).

2 Open the [Special Rec] submenu.

[ 4K/2K/MXF Setup] > [Special Rec]

3 Select [Pre Rec] and then press SET.

• [PRE REC STBY] appears at the top of the screen.

4 Press the START/STOP button to begin recording.

• The tally lamp illuminates.

• [PRE REC STBY] changes to [Ü PRE REC] while recording.

5 Press the START/STOP button again to stop recording.

• The camera records the clip, including approximately 3 seconds of video and audio recorded before the

START/STOP button was pressed.

• The tally lamp goes out and [PRE REC STBY] appears at the top of the screen.

NOTES

• You can use only one special recording mode at a time.

• Pre-recording mode will be deactivated if the special recording mode is changed or turned off. It will be

deactivated also if you change the video configuration.

• During pre-recording mode, the time code will be recorded with the running mode (A 84) set to [Free Run],

regardless of the previous setting. Alternatively, you can use an external time code signal. When the time code

is recorded, it will include the 3 seconds before the START/STOP button was pressed. When special recording

mode is deactivated, the running mode will return to its previous setting.

Operating modes:

[ 4K/2K/MXF Setup]

[

Special Rec]

[Off]

COPY

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 209 210

No comments

Canon EOS C500 User Manual Page 110