Canon EOS C500 User Manual Page 145

  • Download
  • Add to my manuals
  • Print
  • Page
    / 210
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 144
145
Connecting to an External Monitor
Using the MON. 1 and MON. 2 Terminals
During 4K and 2K modes, the camera can output video from the MON. 1 and MON. 2 terminals (MON.
terminals). The signal that is output from the MON. terminals also includes audio, time code, metadata and clip
name information. In addition, the camera can apply onscreen markers, zebra patterns, peaking and
magnification* to the MON. 1 terminal output. Perform the following procedures to enable output from the MON.
terminals and to adjust other related settings.
* Magnification will simultaneously be applied to the MON. 2 terminal output.
Enabling Output from the MON. Terminals
1 Open the [Output] submenu.
[ 4K/2K/MXF Setup] > [MON. 1 & 2] > [Output]
2 Select [On] and then press SET.
Output is enabled for the MON. terminals.
If you do not intend to use the MON. terminals, select [Off]. Doing so
will also conserve the camera’s power.
Selecting the Resolution of the Output
When the resolution of the video configuration is [3840x2160],
[3840x1080] or [1920x1080], the resolution of the output is automatically
set to 1920x1080 so this procedure is not necessary.
1 Open the [Resolution] submenu.
[ 4K/2K/MXF Setup] > [MON. 1 & 2] > [Resolution]
2 Select [2048x1080] or [1920x1080] and then press SET.
Selecting the Scan Mode of the Output
When the recording mode of the video configuration is [HRAW], [4K1K
RAW] or [ 10-bit], this procedure is not necessary because this
function will be set automatically based on the resolution.
1 Open the [Scan Mode] submenu.
[ 4K/2K/MXF Setup] > [MON. 1 & 2] > [Scan Mode]
2 Select [P] or [PsF] and then press SET.
Selecting the Resizing Method
When the recorded video and video output have a different aspect ratio,
perform the following procedure to select how the video is output.
1 Open the [Resize Output] submenu.
[ 4K/2K/MXF Setup] > [MON. 1 & 2] > [Resize Output]
2 Select the desired option and then press SET.
Operating modes:
[ 4K/2K/MXF Setup]
[MON. 1 & 2]
[Output]
[On]
[ 4K/2K/MXF Setup]
[MON. 1 & 2]
[Resolution]
[1920x1080]
[ 4K/2K/MXF Setup]
[MON. 1 & 2]
[Scan Mode]
[P]
[ 4K/2K/MXF Setup]
[MON. 1 & 2]
[Resize Output]
[Letterbox]
COPY
Page view 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 209 210

Comments to this Manuals

No comments