Canon LX-MU500 User Manual download pdf (Page 46)

Hiding the image

In order to draw the audience's full attention to the presenter, you can

use BLANK on the projector or remote control to hide the screen

image. Press any key on the projector or remote control to restore the

image. The word 'BLANK' appears at the lower right corner of the

screen while the image is hidden.

You can set the blank time in the SYSTEM SETUP: Basic > Blank

Timer menu to let the projector return the image automatically after a

period of time when there is no action taken on the blank screen.

Once BLANK is pressed, the projector enters Economic mode

automatically.

Do not block the projection lens from projecting as this could cause the blocking object to become

heated and deformed or even cause a fire.

Locking control keys

With the control keys on the projector locked, you can prevent your projector settings from being changed

accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector

will operate except POWER.

1. Press on the projector or remote control or go to the

SYSTEM SETUP: Basic > Panel Key Lock menu, and select On

by pressing / on the projector or remote control.

2. A confirmation message is displayed. Select Yes to confirm.

To release panel key lock, press any key of the projector once to display

the panel key lock warning. With the warning being displayed, press

on the projector or remote control again. (Press and hold the key

on the projector for 3 seconds.)

You can also use the remote control to enter the SYSTEM SETUP: Basic > Panel Key Lock menu and

press / to select Off.

• Keys on the remote control are still in use when panel key lock is enabled.

• If you press POWER to turn off the projector without disabling panel key lock, the projector

will still be in locked status the next time it is turned on.

Freezing the image

Press FREEZE on the remote control to freeze the image. The word

'FREEZE' will be displayed in the upper left corner of the screen. To

release the function, press any key on the projector or remote control.

Even if an image is frozen on the screen, the pictures are running on

the video or other device. If the connected devices have active audio

output, you will still hear the audio even though the image is frozen on

screen.

Do not keep displaying a still picture for an extended period of

time, as the afterimages may linger on the screen.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 84 85

No comments

Canon LX-MU500 User Manual Page 46