Canon WUX6000 User Manual Page 204
- Page / 236
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Troubleshooting
204
■ You Cannot Project an Image from the Projector
The lens connector is
not attached correctly.
The lens cable is not connected to the lens unit
correctly. Unplug the projector, connect the lens
cable to the lens unit correctly, and then plug the
projector in again. Contact the Canon Customer
Support Center if the same warning occurs again.
The air filter is not
installed correctly.
Check whether the air filter is installed correctly.
(P196)
Key lock is enabled.
Check that Key lock (P101) is not enabled for the
projector or the remote control.
Cause Countermeasure
A cable is not connected
correctly.
Check whether the projector is connected to the
computer or AV equipment correctly. (P132, P135)
20 seconds have not
elapsed since the
projector was turned on.
When the projector is turned on, the opening window
is displayed for approximately 20 seconds. To project
an image immediately, press the OK button on the
remote control or side control. (P38)
No image is sent from
the AV equipment.
Check whether an image is played on the connected
video camcorder, DVD, etc.
Connection with the
input terminal has not
been performed
correctly.
Check whether the AV equipment is connected to the
projector input terminal correctly. (P131)
No input signal type has
been selected for the
connected AV
equipment.
Check that the same input signal has been correctly
selected for the connected AV equipment from the
[INPUT] menu. (P40)
The input signal type is
incorrect.
Check whether the selected input signal type is
correct. (P76, P214)
The BLANK function has
been selected.
Press the BLANK button on the remote control.
(P62)
No image is projected
due to a problem with
the computer.
Turn first the projector and then the computer off and
then back on again.
- User’s Manual 1
- How to Use This Manual 2
- Copyright Notice 3
- About Trademarks 3
- Projector Highlights 4
- Quick Reference Guide 5
- Table of Contents 6
- Installation and 7
- Safety Instructions 10
- Safety Precautions 11
- CAUTION ON HANGING FROM THE 11
- AC Power Cord Requirement 14
- Safety Symbols in this Manual 16
- Precautions for Use 17
- Precautions for Installation 18
- Precautions on the lamp 21
- For Safe Use 23
- Open Source Software 25
- Before Use 27
- Supplied Accessories 28
- Preparing the Remote Control 29
- Part Names 31
- Remote control 32
- Side control 34
- ■ LED Indicator Displays 35
- Input Terminal 36
- Projecting an 37
- Turn the Projector On 38
- Select an Input Signal 39
- Selecting an Input Signal 40
- Adjust the Image 41
- Step 3 Adjust the Image 42
- Auto PC Adjustment 43
- Adjusting Image Focus 44
- Adjusting Image Size 45
- Adjusting the Image Position 46
- ■ Resetting the Position 47
- Selecting Screen Aspect 48
- Operation Projecting an Image 49
- 16:9 D. image shift 50
- 4:3 D. image shift 50
- Resetting the Image Shift 52
- Select the Aspect 52
- Types of Aspect Ratios 52
- Selecting an Aspect Ratio 53
- Correct the Image Distortion 54
- ■ Corner Adjustment 55
- [Install settings] menu 56
- Image Modes 57
- ■ Selecting an Image Mode 58
- Set Power-Saving Settings 59
- Turn the Projector Off 60
- Useful Functions 61
- Available During a 61
- Presentation 61
- Useful Presentation Functions 62
- Adjusting the Volume 63
- Muting the Sound 63
- Zooming Part of an Image 64
- 2 Press the INPUT button 65
- Remote control Projector 66
- Split-Screen Display 67
- Setting Functions 71
- Using Menus 72
- Basic Menu Operations 73
- Selecting the Aspect 75
- Setup Using Auto PC 76
- Selecting an Input 76
- Adjusting the Input 77
- Adjusting HDMI Input 79
- Setting the HDMI 79
- Color Format 79
- Specifying HDMI 80
- Overscan 80
- Specifying Progressive 80
- Processing 80
- Slideshow Interval 81
- Specifying Split 82
- Screen Display 82
- Specifying Image 83
- Priority in Split-Screen 83
- Specifying the Image 84
- Creating/Saving a 85
- User Profile 85
- Adjusting Brightness 86
- Adjusting Contrast 86
- Adjusting Sharpness 87
- Correcting Gamma 87
- Adjusting Colors 88
- Adjusting to the 89
- Ambient Light 89
- Reducing Image 90
- Dynamic Gamma 91
- Correcting Memory 92
- Fine-Tuning Colors 92
- Fine-Tuning Gamma 93
- Specifying Lamp 94
- Specifying the Lamp 95
- Resetting Image 95
- Adjustment Settings 95
- Registering User Logos 96
- Positioning User 96
- No Signal Screen 97
- Screen When Blank 97
- Selecting a Logo at 98
- Specifying Power 98
- Management Mode 98
- Management Duration 99
- Specifying Direct 99
- Power-On 99
- Specifying Silence or 100
- Operating Tones 100
- Specifying Key Repeat 100
- Operation 100
- Locking Projector or 101
- Remote Buttons 101
- Assigning a Channel 102
- Reducing Motion 103
- Selecting a Display 103
- Language 103
- Requiring a Password 104
- Setting a Password 105
- Using the Remote 105
- Control [Fn] Button 105
- Selecting Audio Input 106
- Restoring Original 107
- Gamma Settings 107
- Specifying HDMI Input 108
- Resetting the Lamp 108
- ■ About the Display of the 109
- Lamp Counter 109
- Resetting the Air Filter 110
- Updating the Firmware 110
- Resetting to the 111
- Default Setting 111
- [Information] 112
- Installation 113
- Before Installation 114
- ■ Be Careful of Condensation 116
- Installation Procedure 118
- ■ Installing the Lens Unit 120
- ■ Removing the Lens Unit 124
- Projecting Distance 125
- Lens Shift Function 129
- Connection Procedure 131
- Connecting a Computer 132
- Connection) 133
- Connecting AV Equipment 135
- Plugging the Projector In 138
- Starting Projection 139
- ■ When “No signal” Appears 140
- ■ Adjusting Image 140
- Locking Installation 141
- Settings 141
- Flipping Image 141
- Specifying the Screen 142
- Adjusting the Size of 143
- Projected Images 143
- Specifying Keystone 144
- Correction 144
- Specifying Digital 145
- Image Shift 145
- Specifying Micro 145
- Digital Image Shift 145
- Adjusting Image 146
- Registration 146
- Specifying the Fan 146
- Specifying Vertical 147
- Projection 147
- Saving and Restoring 147
- Lens Positions 147
- Screen Color 148
- Adjustment 148
- Specifying a Menu 149
- Position 149
- Showing/Hiding the 149
- Guide Screen 149
- Showing/Hiding Input 150
- Showing/Hiding 150
- Overheat Warnings 150
- Specifying the Menu 151
- Display Time 151
- Showing/Hiding Lamp 151
- Replacement 151
- Warnings 151
- Showing/Hiding Filter 152
- Cleaning Warnings 152
- Showing/Hiding Split 152
- Screen ID 152
- Displaying Test 153
- Patterns 153
- (Edge Blending) 154
- 3 Set [Marker] to [On] 155
- 7 Set [Marker] to [Off] 156
- Connecting to a 163
- Network Connection Overview 164
- Completing Projector Settings 165
- Specifying the 166
- Network Password 166
- Registering a Network 167
- Password 167
- Specifying Standby 167
- Power Consumption 167
- Specifying DHCP 169
- Specifying TCP/IP 169
- Initializing Network 170
- Specifying PJLink 170
- Specifying AMX 171
- Device Discovery 171
- Specifying Crestron 172
- RoomView 172
- Completing Computer Settings 173
- Setting Up the Network 177
- ■ Network Setting 179
- Setting a Password [Password] 180
- Setting Up Email [Mail] 183
- SNMP Settings [SNMP] 185
- Setting PJLink [PJLink] 187
- [Crestron Controller] 187
- Setting Errors 188
- 2 Click [Initialize] 189
- Control via the Web Screen 191
- Maintenance 193
- Cleaning the Air Filter 194
- Replacing the Air Filter 196
- Replacing the Lamp 197
- Replacement Lamp 198
- Appendix 201
- Troubleshooting 202
- Symptoms and Solutions 203
- ■ There is no Sound 205
- Appendix Other Information 209
- Displayed Test Patterns 213
- Supported Signal Types 214
- Product Specifications 216
- ■ Remote control 217
- ■ Service Port (CONTROL) 221
- Control commands 222
- Appendix Index 225
- Menu Configuration 228
- G Offset 229
Related products and manuals for Data projectors Canon WUX6000
(1 pages)
Data projectors Canon 0646C003 Datasheet
(6 pages)
(6 pages)
Data projectors Canon 6836B003 Datasheet
(2 pages)
(2 pages)
Data projectors Canon 6835B003 Datasheet
(3 pages)
(3 pages)
Data projectors Canon 6831B003 Datasheet
(2 pages)
(2 pages)
Data projectors Canon 6830B003 Datasheet
(2 pages)
(2 pages)
Data projectors Canon 6827B003 Datasheet
(3 pages)
(3 pages)
Data projectors Canon 5805B005 Datasheet
(3 pages)
(3 pages)
Data projectors Canon 6829B004 Datasheet
(2 pages)
(2 pages)
Data projectors Canon 6828B003 Datasheet
(2 pages)
(2 pages)
Data projectors Canon 5321B012 Datasheet
(2 pages)
(2 pages)
Data projectors Canon 4233B007 Datasheet
(12 pages)
(12 pages)
Data projectors Canon XEED SX7 Datasheet
(3 pages)
(3 pages)
Data projectors Canon 0381B003 Datasheet
(4 pages)
(4 pages)
Data projectors Canon 9044A003 Datasheet
(2 pages)
(2 pages)
Data projectors Canon 0027B003 Datasheet
(8 pages)
(8 pages)
Data projectors Canon LV7265 Datasheet
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 0.104 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals