Using the Projector on a Network
148
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to “Network Setting” (P144).
Item Explanation Factory default setting
Error report Select whether to turn the error mail
sending function on or off.
OFF
To: Enter the recipient address for error
mails in 1-byte alphanumeric characters
and symbols (1 - 63 characters).
MailUserAccount
Cc: Enter the CC address for error mails in
1-byte alphanumeric characters and
symbols (1 - 63 characters).
<Blank>
From: Enter the sender address for error mails
in 1-byte alphanumeric characters and
symbols (1 - 63 characters).
SMTP server IP address Enter the SMTP server IP address in 1-
byte numbers.
0.0.0.0
SMTP server port
number
Enter the SMTP server port number in 1-
byte numbers (1 - 65535).
25
SNTP server IP address Enter the SNTP server IP address in 1-
byte numbers.
0.0.0.0
Time zone Select the time zone where the
projector is used.
(GMT) Dublin, Lisbon,
London
Mail resend interval* Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 - 59 seconds using
1-byte numbers.
10
Comments to this Manuals