Canon XEED 4K501ST User Manual download pdf (Page 151)

151

Using the Projector on a Network

Advanced Guide Using the Projector on a Network

Setting PJLink [PJLink]

From [PJLink] in the settings screen, you can set the PJLink functions which are the

standard for projector management on a network. For the setting procedure, refer

to “Network Setting” (P144). For information about PJLink, refer to “What is

PJLink?” (P136).

Item Explanation Factory default setting

Projector name Enter the projector name in 1-byte

alphanumeric characters and symbols

(1 - 63 characters).

Canon Projector001

Comment Enter any relevant notes, such as

where the projector is installed.

<Blank>

Some characters such as # cannot be used for [Projector name] and [Comment].

Item Explanation Factory default setting

PJLink Turn the PJLink function on or off. If

OFF is selected, the PJLink function

will be turned off and the other settings

in this screen cannot be changed.

PJLink authentication Select whether to turn the PJLink

authentication function on or off. If OFF

is selected, it is not possible to change

the following items.

[Password]

[Confirm password]

Password Enter the PJLink authentication

password in 1-byte alphanumeric

characters (1 - 32 characters).

system

Confirm password For confirmation, enter the same

password that you entered in

[Password].

system

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 195 196

No comments

Canon XEED 4K501ST User Manual Page 151