Canon XEED 4K501ST User Manual download pdf (Page 36)

Installation Procedure

Before setting up the projector, be sure to read “Before Installation” (P19).

Setting Up the Projector

■ Positioning the Projector in Front of the Screen

Place the projector in front of the screen.

■ Floor Installation

To adjust the projection position when the projector is installed on the floor, use the

lens shift function (P50, P70) to adjust the image up / down / left / right.

For information about the relationship between screen size and projection distance,

refer to page 49.

• To avoid keystone distortion, install the

projector so that it is at right angles to the

screen.

• The screen must not be exposed to direct

sunlight or light from lighting equipment.

In a bright room, it is recommended that

lights be turned off, curtains be drawn,

and other steps taken to make the screen

easier to see.

• Colors may appear distorted when

images are viewed from the side on

some screens. For best results, use a

matte screen with a wide viewing angle.

Optical axis

Screen

Lens shift

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 195 196

No comments

Canon XEED 4K501ST User Manual Page 36