Canon i-SENSYS LBP7660Cdn User Manual download pdf (Page 392)

[Read Only] modes.

c. When using Community Name 2, select the check box for [Use Community Name 2], and set the following

Set the SNMP Community Name in Community Name 2. Up to 32 characters can be entered. The

default setting is [public2].

Using [MIB Access Permission], select whether to operate the SNMPv1 agent in one of [Read/Write] or

[Read Only] modes.

When you are not using SNMPv1 protocol

Clear the [Use SNMPv1] check box.

When the [Use SNMPv1] check box is cleared

The following problems may occur.

* You may not be able to use some functions of Canon utility software or to use the software properly

due to an error occurring.

* You may not be able to specify or browse each option for this printer from utility software that uses

the SNMP v. 1 protocol to obtain information.

If you clear the [Use SNMPv1] check box, set it after consulting with the network administrator.

(2) Set a dedicated community.

a. In the [Dedicated Community 1] settings, select from [Off], [Read/Write] or [Read Only].

b. In the [Dedicated Community 2] settings, select from [Off], [Read/Write] or [Read Only].

(3) Configure the SNMP v. 3 protocol.

Canon i-SENSYS LBP7660Cdn User Manual Page 392