Canon IMAGECLASS MF5700 User Manual download pdf (Page 72)

Special Features

5-13

Copying

Adjust any necessary settings for your document.

• Press [Image Quality] to select the scanning resolution. (See “Adjusting the Image

Quality (Resolution),” on p. 5-6.)

• Press [Exposure] to select the scanning exposure. (See “Adjusting the Exposure

(Density),” on p. 5-6.)

• Press [Enlarge / Reduce] to select the copy ratio. (See “Setting Enlarging/Reducing,”

on p. 5-4.)

• Press [Collate / 2on1] to perform the collate copy or 2 on 1 copy function. (See

“Special Features,” on p. 5-8.)

Press [Start].

The machine begins scanning.

NOTE

•

After printing of the current copy job is complete, the next copy job begins.

•

If the memory becomes full while scanning, <MEMORY FULL> appears in the LCD.

When the ADF is used for scanning, the document being scanned stops in the ADF.

Press [Set] to make the document come out automatically. If the document does not

come out, it may be jammed in the ADF. Follow the procedure in “Removing Jammed

Paper from the ADF,” on p. 9-7 to clear the paper jam in the ADF.

All of the scanned documents will be erased if <MEMORY FULL> appears, so divide the

document and copy each part separately, or select a lower image quality mode and

make copies again.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 138 139

No comments

Canon IMAGECLASS MF5700 User Manual Page 72