Canon PIXMA MP495 Service Manual download pdf (Page 5)

(5/15)

7 times Ink absorber

full

Japan:

[5B00]

Others:

[5B01]

P07 The ink absorber becomes

full.

Replace the ink absorber (ink absorber kit),

and reset the ink absorber counter.

8 times Print head

temperature

rise error

[5200] P08 The print head temperature

exceeded the specified

value.

Replace the following items (listed in the

order of likeliness to be faulty):

- Ink cartridge

- Logic board

9 times EEPROM error [6800]

[6801]

P09 A problem occurred in

reading from or writing to

the EEPROM.

Replace the logic board.

10 times VH monitor

error

[B200] P10 The print head voltage is

abnormal.

Replace the following items:

- Ink cartridge

- Logic board

20 times Other

hardware error

[6500] P20 An unidentified error or a

network error occurred.

Replace the following item (listed in the

order of likeliness to be faulty):

- Logic board

- WLAN board

22 times Scanner error [5011] P22 The scanner unit is faulty. Replace the following items (listed in the

order of likeliness to be faulty):

- Scanner unit

- Logic board

23 time Scanner motor

error

[5012] P22 The scanner motor is faulty. Replace the following items (listed in the

order of likeliness to be faulty):

- Scanner unit

- Logic board

1-3. Other Error

7-segment

LCD

Cause Solution

E20 The wireless LAN setting was

attempted while other settings were

being performed.

Wait until the settings being performed were completed, then

try the wireless LAN setting.

E23 In WPS wireless LAN setting,

multiple access points were detected.

Wait for a while, and perform the setting again.

E24 In WPS wireless LAN setting, an

error occurred.

Confirm the access point, and perform the setting again.

E50 The machine failed in scanning the

print head alignment sheet.

Press the Stop/Reset button to clear the error, perform the

following, then try the print head alignment again:

- Confirm that the sheet is placed in the correct orientation.

- Clean the platen glass, if it is smeared.

- Confirm that A4 plain paper is used.

- Print the nozzle check pattern to confirm that all the ink is

ejected properly.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Canon PIXMA MP495 Service Manual Page 5

Comments to this Manuals

Related products and manuals for Networking Canon PIXMA MP495