Canon PIXMA MP210 Specifications download pdf (Page 49)

45Troubleshooting

 Power Lamp Flashes Green and Alarm Lamp Flashes Orange

Alternately

The Power and Alarm lamps flash alternately as shown below.

Disconnect the USB cable from the machine, turn the machine off, and then unplug the machine

from the power supply. Plug the machine back in and turn the machine back on after leaving it

for a while.

If the problem is not resolved, contact your Canon Service representative.

E, 1, 3 Ink level cannot be

detected.

Ink may have run out.

The function for detecting the remaining ink level will be disabled since the

ink level cannot be correctly detected.

If you want to continue printing without this function, press the Stop/Reset

button for at least 5 seconds.

Canon recommends to use new genuine Canon cartridges in order to

obtain optimum qualities.

Please be advised that Canon shall not be liable for any malfunction or

trouble caused by continuation of printing under the ink out condition.

E, 1, 4 The FINE Cartridge

cannot be recognized.

The FINE Cartridge may not be compatible with this machine. Install the

appropriate FINE Cartridge. See “Replacing a FINE Cartridge” on page 33.

E, 1, 5 The FINE Cartridge

cannot be recognized.

The FINE Cartridge may not be installed properly.

Open the Scanning Unit (Printer Cover) and install the FINE Cartridge

properly.

If the error is not resolved, the FINE Cartridge may be damaged. Contact

your Canon Service representative.

E, 1, 6 Ink has run out. Ink has run out.

Replace the ink cartridge and close the Scanning Unit (Printer Cover).

If printing is in progress and you want to continue printing, press the Stop/

Reset button for at least 5 seconds with the ink cartridge installed. Then

printing can continue under the ink out condition.

The function for detecting the remaining ink level will be disabled.

Replace the empty ink cartridge immediately after the printing. The

resulting print quality is not satisfactory, if printing is continued under the ink

out condition.

E, 1, 9 PictBridge compliant

device is connected via a

USB hub.

If a PictBridge compliant device is connected via a USB hub, remove the

hub and connect it directly to the machine.

E, 2, 0 The size of the document

cannot be correctly

detected or the document

is too small when the Fit-

to-Page copying is

selected. / Scanning the

Print Head Alignment

Sheet has failed.

z The size of the document cannot be correctly detected or the document

is too small when the Fit-to-Page copying is selected.

Make sure the document meets the requirements and correctly loaded

on the Platen Glass. Then reload the document and press the Black or

Color button.

See “Loading Original Documents” on page 6.

z Scanning the Print Head Alignment Sheet has failed. Make sure all

required boxes on the head alignment sheet are filled in, and that the

sheet is set in the correct position and orientation on the Platen Glass.

If the error is not resolved, connect the machine to the computer and

align the Print Head on the printer driver. For details, refer to “Aligning

Print Head on the Computer” in the User’s Guide on-screen manual.

Error Code Cause Action

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 79 80

Comments to this Manuals

No comments

Canon PIXMA MP210 Specifications Page 49

Comments to this Manuals

Related products and manuals for Photo printers Canon PIXMA MP210