Canon PIXMA MP450 User Manual download pdf (Page 93)

Chapter 10 91

Routine Maintenance

FINE Cartridge Deep Cleaning

If the print quality does not improve after a standard FINE Cartridge Cleaning, try FINE Cartridge

Deep Cleaning, which is a more powerful cleaning process. FINE Cartridge Deep Cleaning

consumes more ink than standard FINE Cartridge Cleaning, so perform this procedure only when

necessary.

1 Ensure that the machine is turned ON and the Scanning Unit is closed.

2 Start FINE Cartridge Deep Cleaning.

(1) Display the Maintenance screen.

(2) Use [ ] or [ ] to select <Deep cleaning>, then press [OK].

(3) When the confirmation message is displayed, select <Yes> and press [OK].

FINE Cartridge Deep Cleaning starts when the [ON/OFF] lamp starts flashing.

3 Check the FINE Cartridge condition.

(1) Print a nozzle check pattern to evaluate a FINE Cartridge condition.

See “Printing The Nozzle Check Pattern” on page 86.

(2) If the problem persists, turn OFF the machine for at least 24 hours, and perform step 2 again.

(3) If the problem persists, the machine may have run out of ink.

See “Replacing A FINE Cartridge” on page 76.

Important

Do not perform any other operations until FINE Cartridge Deep Cleaning

finishes. This takes about one to three minutes.

Note

If FINE Cartridge Deep Cleaning does not improve the print quality even if

you have replaced the Cartridge, contact a Canon service representative.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 141 142

No comments

Canon PIXMA MP450 User Manual Page 93