Canon IP ReadyTM Series Video Alarm FDW75C12N Operations Instructions download pdf (Page 13)

- 12 -

INSTALLING QUICK RELEASE BRACKETS

ELMO PTC-400C

Mounting plate for this unit is included in the housing

packet. Remove existing mounting plate installed in the unit

before proceeding.

2539 Mounting Plate:

1. Place the camera onto the quick release bracket using

the (4) metric 3M Phillips head screws provided with the

kit.

Attach camera using these (4) holes

½"

2. The Elmo PTC-400C camera requires 3.5" of spacing for

optimal position within the housing. Use (4) 2" spacer(s),

plus (4) 1" spacer(s) and (4) ½" spacer(s) provided in the

(2) hardware packets.

3. Place (3) 8 x 32 x 9Phillips head screws on the top

of the spacer as shown above. Be sure to place the

screws so that they line up with the open slots on the

mounting plate.

4. Slide the mounting plate with camera into position on

top of spacers. Secure 3 screws and captive fastener.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

No comments

Canon IP ReadyTM Series Video Alarm FDW75C12N Operations Instructions Page 13