Canon VB-C10R User Manual download pdf (Page 107)

6-3

Using the Picture Recording Function

Using the Still Picture Recording Function Linked to an External Device

Sample Still Picture Recording Settings

Settings specified on the “Camera Settings” page (→ P.3-11)

Specify the appropriate settings for the VB-C10R being used.

Settings specified on the “Preset Settings” page (→ P.3-15)

Set a camera angle that shoots the open doorway as Preset 1.

Recording conditions to be set (→ P. 3-16)

● Select “Record pictures in response to external inputs”.

● Select “Record still pictures for validated external input events during the Start-Stop times

specified below.”

● Set start time to 17:00:00 and end time to 06:00:00.

● Select all days of the week.

● Select “ON event (OPEN to CLOSE)”.

● At “Pre-event Recording”, set still pictures to be recorded every 1 second, and set “Record

still picture(s) for every specified interval” to 3. With these settings, pictures will be recorded

and stored every second starting 3 seconds before door opens.

* With “Pre-event Recording”, no picture is recorded the instant the input goes ON.

● At “Post-event recording”, set still pictures to be recorded every 1 second, and set “Record

still picture(s) for every specified interval” to 8. With these settings, pictures will be recorded

and stored every second for 7 seconds starting from the instant the door opens.

* With “Post-event Recording”, pictures are recorded from the instant the input goes ON.

● Set position of camera to be used for recording to Preset 1.

* Events occurring during the Post-event Recording are ignored.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 137 138

No comments

Canon VB-C10R User Manual Page 107