Canon EOS 2000D User Manual download pdf (Page 249)

249

w Printing

You can crop the image and print only an

enlarged version of the cropped portion,

as if the image is recomposed.

Set the cropping right before printing.

If you change the print settings after

setting the cropping, you may have to set

the cropping again before printing.

1 On the print setting screen, select [Cropping].

2 Set the cropping frame size, position, and aspect ratio.



The image area within the cropping frame will be printed. The

cropping frame’s aspect ratio can be changed with [

Paper settings

Changing the Cropping Frame Size

Press the <u> or <Hy> button to change the cropping frame

size. The smaller the cropping frame, the larger the image

magnification will be for printing.

Moving the Cropping Frame

Press the <S> cross keys to move the frame over the image

vertically or horizontally. Move the cropping frame until it covers

the desired image area.

Rotate the Cropping Frame

Pressing the <B> button will toggle the cropping frame

between the vertical and horizontal orientations. This enables you

to create a vertically oriented print from a horizontal image.

Image Tilt Correction

By turning the <6> dial, you can adjust the image tilt angle up to

±10 degrees in 0.5-degree increments. When you adjust the

image tilt, the <O> icon on the screen will turn blue.

3 Press <0> to exit the cropping.

 The print setting screen will reappear.

 You can check the print area on the upper left of the print setting

screen.

Cropping the Image

Tilt correction

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 325 326

No comments

Canon EOS 2000D User Manual Page 249