Canon EOS 7D User Manual download pdf (Page 213)

213

wPrinting

You can crop the image and print only

the trimmed portion as if the image was

recomposed. Do the trimming right

before printing. If you set the trimming

and then set the print settings, you may

have to set the trimming again.

1 On the print setting screen, select [Trimming].

2 Set the trimming frame size, position, and aspect ratio.



The image area within the trimming frame will be printed. The

trimming frame’s aspect ratio can be changed with [

Paper settings

Changing the trimming frame size

When you press the <u> or <I> button, the size of the

trimming frame will change. The smaller the trimming frame, the

larger the image magnification will be for printing.

Moving the trimming frame

Use <

> to move the frame over the image vertically or horizontally.

Move the trimming frame until it covers the desired image area.

Rotating the frame

Each time you press the <

> button, the trimming frame will

toggle between the vertical and horizontal orientations. This enables

you to create a vertical-oriented print from a horizontal image.

Image tilt correction

By turning the <5> dial, you can adjust the image tilt angle up to

±10 degrees in 0.5-degree increments. When you adjust the

image tilt, the <O> icon on the screen will turn blue.

3 Press <0> to exit the trimming.

 The print setting screen will reappear.

 You can check the trimmed image area on the upper left of the

print setting screen.

Trimming the Image

Tilt correction

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 295 296

No comments

Canon EOS 7D User Manual Page 213