Canon MV 6 I MC Instruction Manual download pdf (Page 58)

Playing Back a Tape with Added

Sound

You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust

the balance of both sounds.

1. Open the FUNC. menu, select ( ) the icon and press ( ).

2. Select ( ) the [AUDIO SETUP] menu and press ( ). Then, select

( ) the [12bit AUDIO] option and press ( ).

3. Select a setting option and press ( ) to save the changes.

• STEREO1: Plays back the original sound.

• STEREO2: Plays back the added sound.

• MIX/FIXED: Plays back Stereo 1 and Stereo 2 in the same level.

• MIX/VAR.: Plays back Stereo 1 and Stereo 2. The mix balance can be adjusted.

• If you select an audio setting other than [MIX/VAR.], close the menu.

To adjust the mix level when you select [MIX/VAR.]:

4. From the [AUDIO SETUP] menu select ( ) the [MIX BALANCE]

option and press ( ).

5. Adjust ( ) the mix level between ST-1 and ST-2 and press ( ) to

save the changes, then close the menu.

 The camcorder resets to [STEREO1] when you turn the camcorder off.

However, the mix balance is memorized by the camcorder.

 Audio dubbing cannot be performed with your camcorder.

(33)

AUDIO SETUP 12bit AUDIO STEREO1

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 85 86

No comments

Canon MV 6 I MC Instruction Manual Page 58