Canon SX80 Mark II User Manual download pdf (Page 84)

Setting Display Status

84

Adjust Input Signal (ANALOG PC) – Vertical

pixels

[Input signal settings] - [Vertical pixels]

You can adjust the number of the pixels in

the vertical direction if the length of the

screen is too long or too short in the verti-

cal direction.

Use [<] / [>] to select a value.

When you have completed the adjust-

ment, press the MENU button.

• Perform this adjustment if the [AUTO

PC] function (P57) cannot adjust the

project image correctly.

• You can make adjustment either for

[ANALOG PC-1] or [ANALOG PC-2].

Selecting HDMI Input Level (SX80 II)

[HDMI input level]

You can select this as required when you

project visual software with the HDMI sig-

nals.

Press the OK button to accept your setting

and then press the MENU button.

• [Auto] is the factory default.

• You can select this only when the type of

signal sent from AV equipment is RGB.

• The signal level is select automatically in

[Auto] mode. (Some AV equipment may

not support this.)

• If the HDMI output of your AV equipment

allows switching between [Normal] and

[Expanded], we recommend you to set

[Expanded]. The contrast of images will

be improved and dark scenes will be

rendered more realistically. In this case,

select [Auto] or [Expanded] for the

HDMI input level.

For more detailed information, refer to

the User's Manual of your AV equipment

connected to the projector.

HDMI COMPONENT

DIGITAL PC

VIDEO/S-VIDEO

ANALOG PC USB

Input signal settings

Display settings

Vertical pixels

HDMI COMPONENT

DIGITAL PC

VIDEO/S-VIDEO

ANALOG PC USB

HDMI input level

Display settings

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 167 168

Comments to this Manuals

No comments