Canon SX80 Mark II User Manual download pdf (Page 85)

85

Setting Display Status

Setting Up Functions from Menus

Select HDMI Over Scan (SX80 II)

[HDMI over scan]

You can select this as required when you

project visual software with the HDMI sig-

nals.

Press the OK button to accept your setting

and then press the MENU button.

• [On] is the factory default.

Performing Progressive Processing

[Progressive]

You can select this as required when the

images have low resolution.

Press the OK button to accept your setting

and then press the MENU button.

• [Auto] is the factory default.

• You can set this mode for either [HDMI

(SX80 II)], [COMPONENT], [VIDEO] or

[S- VIDEO (SX80 II)].

• Select [Off] when flickers and horizontal lines

are noticeable on a fast-moving picture.

• For the details of the progressive pro-

cessing, refer to the page 154.

HDMI COMPONENT

DIGITAL PC

VIDEO/S-VIDEO

ANALOG PC USB

Off The entire input signals (100%) are pro-

jected.

The images projected may be smaller

than the full projection screen.

On Images are projected with disorders at

their peripheral section of images

trimmed off. (The central 95% of the

images are projected.)

A part of peripheral sections of images

may be cut out depending on the resolu-

tion of the signals. In such a case, select

[Off].

HDMI over scan

Display settings

HDMI COMPONENT

DIGITAL PC

VIDEO/S-VIDEO

ANALOG PC USB

Off Do not perform the progressive pro-

cessing.

On Performs the progressive processing.

This mode is available when the

HDMI signal is 1080i or, VIDEO/S-

VIDEO or COMPONENT signal is

1080i, 1035i, 576i, or 480i.

Auto Performs the appropriate progres-

sive processing according to the

input signal.

Progressive

Display settings

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 167 168

Comments to this Manuals

No comments