Canon Macro Twin Lite MT-24EX User Manual download pdf (Page 29)

You can set the flash output manually from full output at 1/1 to 1/64 output in

full-stop increments. The flash can be fired in one of three ways: 1. A and B fired

at the same output, 2. A and B fired at a different output, 3. Only A or B is fired.

You should first take a test shot to check the exposure.

Select <q>.

Press the <D> button to

display <q>.

Set the flash output.

Press the <a> button.

X The flash output blinks.

Press the <h> or <i> button to set

the flash output.

Each time you press the button, the flash

output will increase/decrease by 1 stop.

Press the <a> button.

X The flash output is displayed.

For step 2 above, follow the procedure below to set a different flash output for A and B.

1 Press the <f> button to display <yl>.

2 Select the flash tube/head.

Press the <

> button to select <

>, and the <

> button to select <

3 Set the flash output.

Press the <h> or <i> button to set the flash output.

Pressing the <i> button to set the flash output to “--” will set

only the other flash tube/head to fire.

X The setting after 1/64 is “--”. The flash tube/head whose flash

output has been set to “--” will not fire.

q Manual Exposure

Firing A and B at the Same Flash Output

Firing A and B at a Different Flash Output

MR14_MT24_02.fm Page 27 Tuesday, December 20, 2005 4:36 PM

1 ... 28 29 30 ... 136

No comments

Canon Macro Twin Lite MT-24EX User Manual Page 29